The specific requirements for pollution removal from ships in Yantai are as follows:

Specific requirements for oil boom:

1. If it is necessary to adjust the type of oil boom or the total height requirements according to the characteristics of the local waters, it shall be approved by the national maritime administration agency.

2. The requirements for fire booms are only applicable to ship pollution removal units that provide pollution removal services for oil tankers and oil mining platform transfers.

Specific requirements for cleaning device:

1. The temperature of the hot water cleaning device should not be lower than 80℃ and the pressure should reach at least 8MPa.

2. The pressure of the cold water cleaning device should be at least 8MPa.

3. Hot water cleaning device can replace cold water cleaning device

Specific requirements for oil skimmer:

1. Recovery capacity refers to the total amount of oil-water mixture recovered per hour by a single or multiple sets of skimmers.

2. The high viscosity oil skimmer should have the ability to recover the following oil products:

(1) Crude oil with a density greater than or equal to 900kg/m3 at 15°C;

(2) Fuel with a density greater than or equal to 900kg/m3 at 15°C or a flow viscosity greater than or equal to 180mm2/s at 50°C.

3. The medium and low viscosity oil skimmer should have the ability to recover the following oil products:

(1) Crude oil whose density is less than 900kg/m3 at 15℃;

(2) Fuel with a density of less than 900kg/m3 at 15°C or a flow viscosity of less than 180mm2/s at 50°C.

Specific requirements for pollutant disposal:

1. Pollutant disposal capacity refers to the number of tons processed per day for handling liquid, solid pollutants or other polluting hazardous goods.

2. The cleanup unit may own or agree to have a pollutant disposal device matching the cleanup capacity.

Specific requirements for unloading device:

1. Unloading capacity refers to the total amount of oil unloaded per hour by a single or multiple unloading devices.

2. The first-level unit should be equipped with at least one unloading pump capable of unloading high-viscosity oil products of 150m3/h and above; the second-level unit should be equipped with at least one unloading pump capable of unloading high-viscosity oil products of 100m3/h and above; The unit should be equipped with at least one unloading pump capable of unloading high-viscosity oil products of 50m3/h and above; the fourth-level unit should be equipped with at least one unloading pump capable of unloading high-viscosity oil products of 15m3/h and above.